12
12-44 bizhub 350/250
To specify the processing of received documents per line
1 In the Administrator mode, click the [Fax/Scan] tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to administrator mode” on page 12-9.
2 Click [RX Document], then [Port].
3 Click a port name (G3).
– If the optional fax multi line is being used, two general subscriber
lines can be used. Specify settings for each port: “G3-1” (port 1)
and “G3-2” (port 2).
– To specify settings for documents sent through the network (such
as Internet faxes), click [Network].
To Next Page
Loading...
Need help?
General
