3
3-30 bizhub 350/250
3.7 Combining one-touch dialing and direct dialing (chain
dialing)
Multiple recipients can be specified using a combination of one-touch dial
buttons and direct dialing. This is called “chain dialing”. For example, if a fax
communication network or the access number for the contracted telephone
company is registered with a one-touch dial button, it can be combined with
a one-touch dial button programmed with the recipient’s fax number. In ad-
dition, if the fax number and the extension number of a recipient are pro-
grammed in different one-touch dial buttons, the recipient can be specified
by combining the two numbers.
To send a fax using chain dialing
1 Press the [Fax/Scan] key to display the Fax mode screen.
2 Press [Chain Dial].
[Chain Dial] is highlighted.
3 Press [One-Touch] or [Direct Input],
and then specify the first number.
4 Press [One-Touch] or [Direct Input],
and then specify the second number.
– If the second number is specified
from the Direct Input screen, a
pause can be entered between the two numbers.
– If a country code and recipient’s fax number is entered immediately
after the international dialing code, a busy signal may heard while
the number is dialed and the fax cannot be sent. In this case, press
[Pause] twice after entering the international dialing code, and then
enter the remainder of the telephone number after a six-second pe-
riod.
5 Place the original on the machine.
6 Press [Start].
Transmission begins.
To Next Page
Loading...
Need help?
General
