11
11-62 bizhub 350/250
11.22 Configuring Functions (Soft Switches)
Soft switches for functions can be set according to your use.
2
Reminder
Do not alter any modes or bits not mentioned in this manual.
Software SW settings
Parameter Description
Mode Selection Specifies the soft switch setting item with 3 digits.
Bit Selection An 8-digit number comprising the mode. Each bit from 0 to 7
is specified with a binary number (0 or 1) to configure
functions.
HEX Selection Allows the functions to be set using hexadecimal numbers (a
combination of 0 to 9 and A to F). For example, the bit
specification of “0011 0000” would be “30” in hexadecimal.
To Next Page
Loading...
Need help?
General
