7
bizhub 350/250 7-7
7.2 Header information
Register the sender name and the fax ID.
Header information
1 Press [Fax/Scan] on the control panel to open the fax screen.
2 Press [FAX Menu].
3 Press [TSI] on the Set 1screen.
4 Select the transmission source
name, and then press [Enter].
– To cancel the function, press
[OFF].
5 Designate the destination. Set the
original document.
6 Press [Start].
The transmission source information is printed.
Item Description Available value
Sender Name The name registered is printed on the docu-
ment received by the other party as a sender
information.
Up to 30 in characters and
symbols.
Sender Fax No. The fax ID registered is printed on the docu-
ment received by the other party as a sender
information.
The fax number of the machine is normally en-
tered.
Up to 20 characters with 0
to 9, +, space, * and #
used.
To Next Page
Loading...
Need help?
General
