7
7-6 bizhub 350/250
2
Note
The functions on the Set 1 screen (“TSI”, “Dest. Insert”, “TX Report”,
“2in1”, “2-Sided TX”, and “Rotation TX”) return to their default settings
after each transmission.
Button Description
Set 1
screen
TSI Information such as the sender’s name, transmission
date, document number and page number can be print-
ed at the edge of the fax printed by the recipient.
Dest. Insert The recipient’s name can be printed on the fax that is
sent.
TX Report The transmission results report can be printed.
2in1 Scans of two document pages can be sent as a single
page. This can be used, for example, to combine two
A4-size document pages and send them as one A4-size
page.
2-Sided TX Double-sided document pages can be scanned and
sent.
Rotation TX An A4-size document can be sent as an A4-size docu-
ment, regardless of the orientation in which it is loaded.
Set 2
screen
Priority TX A document specified as urgent can be given priority and
sent, even if other documents are queued for transmis-
sion.
Timer TX Setting The time to start communication can be specified.
Stamp A stamp can be applied to the document to indicate that
it was scanned.
FAX screen Quick Scan TX Function to send a message each time a page of docu-
ment is read.
Password TX Transmission can be sent with a password attached, as
required when the receiving station is using a closed
area communication mode.
Remote Copy The specified number of copies can be printed with the
recipient’s fax machine.
Application
screen
Bulletin Setting Documents can be registered on a bulletin board set up
on this machine.
Polling TX This function allows you to initiate reception by sending
a command to a destination to receive a document that
is set for transmission at the destination.
Retrieve Documents registered on the bulletin board of a different
fax machine can be retrieved.
Polling RX This function allows you to initiate reception by sending
a command to a destination to receive a document that
is set for transmission at the destination.