3
3-20 bizhub 350/250
% If a country code and recipient’s fax number is entered immediately
after the international dialing code, a busy signal may heard while
the number is dialed and the fax cannot be sent. In this case, press
[Pause] twice after entering the international dialing code to enter a
six-second pause.
4 Load the document to be faxed facing up.
5 Press the [Start] key.
Scanning of the document begins, and then the fax is sent.
If multiple recipients were selected, the Dest. tab of the Check Job De-
tails screen appears so that the selected destinations can be checked.
For details, refer to “Transmitting to Multiple Destinations” on
page 3-26.
2
Note
To stop the transmission, press the [Stop] key. For details, refer to “Stop-
ping the transmission” on page 3-33.
To Next Page
Loading...
Need help?
General
