Operation
34
Pos: 16.1 /Überschri ften/Überschri ften 1/A-E/Bedienung @ 0\mo d_1199789505403_78.doc x @ 34825 @ 1 @ 1
7 Operation
Pos: 16.2 /Überschri ften/Überschri ften 2/U-Z/VVor dem Mäheinsa tz @ 3\mod_120478838446 5_78.docx @ 73168 @ 2 @ 1
7.1 Before mowing
Pos: 16.3 /BA/Sic herheit/7. Gefahrenhin weise alt/Mähwerke/ Gefahr - Arbeitseinsa tz / Mähen @ 73\mod_130769597 2255_78.docx @ 654926 @ @ 1
DANGER! - Using the machine for work
Effect: Danger to life, injuries or damage to the machine.
• The glide skids must rest on the ground before start-up and during work
• Maintain an adequate safety distance from the cutting tools during operation
• There is danger of foreign objects being forcibly ejected even when the machine is
operated properly. Persons must therefore be directed out of the danger zone of the
machine.
• Special care should be taken when working near roads and buildings)
Pos: 16.4 /BA/Sic herheit/7. Gefahrenhin weise alt/Mähwerke Gefahr - Unerwartete Bewegu ng der Schneidwerkzeu ge bzw. des Mähwerkes ( 2014-10-10 12:32:30) @ 3\ mod_1204788756340_78. docx @ 73207 @ @ 1
Danger! - Unexpected movement of the cutting tools or the mowing unit. Stones are
hurled up during operation
Effect: Danger to life, injuries or damage to the machine.
• Do not carry out work on the disc mower until the PTO has been switched off, the engine
has been turned off and the ignition key has been removed! Secure the tractor against
accidental start-up and against rolling!
• Support the lifted cutter bar! Never step under suspended loads!
• Before using the machine, always check the protective devices for damage. Replace
damaged protective devices immediately.
• Safe operation is only guaranteed if the blades have been fitted according to the
instructions!
• Before starting operation, always check the mowing unit for damaged, missing or worn
blades, retaining bolts, leaf springs and cutting discs/blade drum; replace any parts that are
damaged, missing or worn!
• Always replace missing and damaged blades in sets to prevent unbalanced rotation!
• Never install unevenly worn blades on a drum/disc!
• Whenever a blade is changed, also inspect the fasteners and, if required, replace them!
• Move the protective devices into their protective positions.
Pos: 16.5 /BA/Bedienung / EasyCut/Mähen/ Hinweis Beim Mähen Front mähwerke @ 33\mod_1254117934 018_78.docx @ 318312 @ @ 1
Note while mowing
Effect: Proper use of the machine
• Change the front power lift to single-acting (only lifting, no pressing). The lowering of the
mowing unit results from the dead weight of the mowing unit. The mowing unit must not be
additionally loaded over the front power lift.
• During work the hydraulic control lever for the front power lift must be set to “Float position“.
Pos: 16.6 /BA/Bedienung / EasyCut/Mähen/Abs perrhahn für die Fr onthydraulik des Traktor s lösen. @ 33\mod_1254119058 096_78.docx @ 318361 @ @ 1
• Open the shut-off valve for the front hydraulic of the tractor.
Pos: 16.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_119617531122 6_0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
