EasyManuals Logo
Home>KTM>Motorcycle>Freeride E-XC 2021

KTM Freeride E-XC 2021 User Manual

KTM Freeride E-XC 2021
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
3 IMPORTANT NOTES
14
3.7 Power supply
F03119-10
A rechargeable lithium-ion battery
1
(Powerpack HV, 260 V) and a 12-V battery
2
are installed in the vehicle.
The 12-V battery is located at the rear, under the seat. The fuse box
3
is located next to the 12-V battery.
The Powerpack HV is located under the seat and is screwed onto the electric motor. The Powerpack HV can be
removed in a few easy steps.
The Powerpack HV can be charged while it is installed in the vehicle or outside the vehicle.
Check the Powerpack HV for damage to the housing or connector every time it is removed and reinstalled.
The 12-V battery is necessary to operate the vehicle. The vehicle control unit requires the 12-V battery to start
the system. If the 12-V battery is faulty, discharged, or disconnected, the vehicle will not start.
3.8 New Powerpack HV
When using the Powerpack HV for the first time, the vehicle must be ridden until the Powerpack HV is completely
discharged. The vehicle will initially reduce its output power. When operating in power-reduced mode, the vehicle
can still be driven for a few more minutes before the vehicle switches off with blink code 11.
Now charge the Powerpack HV until the battery charger completes the process at 100%. The charge level indica-
tor on the battery charger shows the progress made.
This charging process generally takes approximately 135 minutes, but may take up to four hours. Do not skip this
procedure as it has a significant influence on the performance of the Powerpack HV.
3.9 Operation at low temperatures
In order to protect the Powerpack HV, the motor control reduces the power at low temperatures.
When the temperature of the Powerpack HV drops to below 9 °C, the motor control unit reduces the power to
80%. Below 0 °C, 50% of power remains available. In both cases, the active riding mode indicator flashes slowly.
The vehicle can continue to be operated. The Powerpack HV is not damaged by the power reduction.
The Powerpack HV heats up when the vehicle is in operation. When the temperature of the Powerpack HV rises
above 0 °C, power is restored to 80% after the vehicle is restarted. When the temperature of the Powerpack HV
rises above 8 °C, full vehicle power is restored after the vehicle is restarted.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM Freeride E-XC 2021 and is the answer not in the manual?

KTM Freeride E-XC 2021 Specifications

General IconGeneral
BrandKTM
ModelFreeride E-XC 2021
CategoryMotorcycle
LanguageEnglish

Related product manuals