S.G
GENERAL
92.4mm
STROKE
SERIES
WSM,
01096
(3)
Check Point
of
Every 75,100,150,200 hours (For details, refer
to
page
5-32)
.
0087F035
Oil
pan depth
124 rnm (4.88 in.)
I
*
90mm (3.54 in.)
7.0
Q
5.6
Q
D1403-B(E) (1.85 U.S.gal.) (1.48 U.S.gal.)
(1.54 Imp.gal.) (1.23 Imp.gal.)
'
D1703-B(E)
VI 903-B(E) (2.51 U.S.gal.) (2.01 U.S.gal.)
(2.09 Imp.gal.) (1.672 Imp.gal.)
(3.17 U.S.gal.)
(0.64 Imp.gal.)
*
90
mrn
(3.54 in.)
oil
pan depth
is
optional.
(4)
Check Point
of
Every I00
hours
C04ZF054
C066F035
Changing Engine
Oil
1.
After warming up, stop the engine.
2.
To
change the used oil, remove the drain plug
at
the bottom of
the
engine and drain off
the
oil
completely.
3.
Reinstall the drain plug.
4.
Fill
the new oil up to
the
upper notch
on
the
dipstick.
IMPORTANT
0
0
Engine oil should be MIL-L-2104C or have
properties of API classification CDKE grades.
Change the type of engine oil according to the
ambient temperature.
Above 25°C (77OF)-..------------- SAE 30 or IOW-30
0°C to 25°C (32°F
to 77"F)------ SAE 20 or IOW-30
Below 0°C (32OF)..--
....
....
-..-
SAE
10
W or IOW-30
Checking Fan Belt Tension
1.
Press
the
fan belt between fan pulley and pulley
at force of
98
N
(IO
kgf,
22
Ibs).
Check
if
the fan belt deflection
is
10
to
-\
12
mm
(0.394
tp
0.472
in.)
2.
If
the deflection
is
not within the factory
specifications, loosen the bolt and nuts, and
relocate
the
alternator to adjust,
[A]
Good
[e]
Bad
Checking Fan
Belt
Damage
1.
Check the fan belt for damage.
2.
Check if the fan belt
is
worn and sunk
in
the
pulley
groove.
3.
Replace the fan belt if the belt
is
damaged or
nearly worn out and deeply sunk
in
the pulley
groove.
s-39
To Next Page
Loading...
Need help?
General
