S.5
ELECTRICAL SYSTEM
92.4mm
STROKE
SERIES
WSM,
0109A
I
Rectifier
I
SC3OF107
I
1.
Remove the nuts.
2.
Remove
the
end cover
(1).
3.
Remove the rectifier
(2).
(When reassembling)
0
Be sure to
install
the insulation washer
(3)
on the
bolt at the positive diode side.
[2]
ALTERNATOR (D1403-B(E), D1703mB(E),
VI
903-B(E), F2803-B(E))
C144F030
C144F031
Pulley
1.
With the hexagonal end
of
the pulley shaft
secured with a double-ended ratchet wrench
as
shown
in
the photo, loosen the pulley nut with a
socket wrench and remove
it.
Rear End Cover
1.
Unscrew the three rear end cover screws and the
terminal
"B"
nut and remove the rear end cover.
Brush Holder
1.
Unscrew the two screws holding the brush holder
and remove the brush holder.
S-127
To Next Page
Loading...
Need help?
General
