Kubota D1703-BE User Manual

5.5 ELECTRICAL SYSTEM 92.4rnrn STROKE SERIES WSM, 01092
I SC3OFO64
[2] ALTERNATOR
Pullev
Plunger
1. Remove the end cover (1) of solenoid switch (4).
2. Remove the plunger (2) and spring (3).
(1) EndCover
(2) Plunger
(3) Spring
(4) Solenoid Switch
SC3OF106
C022W 19
I
0
C022F044
1. Hold the shaft with an Allen wrench and remove
2. Remove the pulley.
3. Remove the fan.
the nut.
Drive Side End Frame and Rotor
1 - Remove the through bolts.
2. Remove the drive end frame.
3. Draw out the rotor.
(When reassembling)
0 Install the rotor, lifting up the brushes with a wire
through the access hole.
(1) Rotor
(2) Brush
(3) Wire
(4) End Frame
(5) Bearing
(6) SlipRing
5-1 25

Kubota D1703-BE Specifications

General

Brand	Kubota
Model	D1703-BE
Category	Engine
Language	English