1. GENERAL INFORMATION
1-13
DINK200i/125
LUBRICATION POINTS
ENGINE
Lubrication Points Lubricant
Valve guide/valve stem movable part
Camshaft protruding surface
Valve rocker arm friction surface
Camshaft drive chain
Cylinder lock bolt and nut
Piston surroundings and piston ring grooves
Piston pin surroundings
Cylinder inside wall
Connecting rod/piston pin hole
Connecting rod big end
Crankshaft
Cranksahft one-way clutch movable part
Oil pump drive chain
Starter reduction gear engaging part
Countershaft gear engaging part
Final gear engaging part
Bearing movable part
O-ring face
Oil seal lip
Genuine KYMCO Engine Oil (SAE 10W-
30)
API SG Egnine Oil
Transmission gear SAE 90
Kick starter part
Friction sprin
movable part/shaft movable part
Final gear shaft grooved part
High-temperature resistant grease
Starter one-way clutch threads Thread locking agent
A.C. generator connector
Transmission case breather tube
Adhesive
To Next Page
Loading...
Need help?
General