English
11 EN
Water dose programming using the "self-learning" function
Press keyto be programmed. When
the desired level is reached in the
containerpressthekeyagain.
Continuewithanyadditionalprogram-
mingofthekeys.
The dispensing time and temperature
of the water added will be displayed
whichcanbecorrectedmanuallyusing
the buttons .
Afterwards, confirm the values by
pressing the icon.
Press the icon to exit the SELF-
LEARNING phase.
Place a container suitable for the
amountyouwishtollbeneath the hot-
water outlet and press the
icon.
The buzzer sound will stop and the red
border at the top left of the
icon
will disappear.
The buzzer sound and the red border
around the
icon indicate the
SELF-LEARNING STAGE.
4 5
321
6