English
41EN
Logo
Turn the machine off and back on again; when it comes back on the following
willappearontheservicesdisplay:
PressOKandwaitfortheletoload:
Usinganygraphicsprogram(e.g.Paint),
createalethatmeetscertaincharacteristics;
the prerequisites for a bitmap image to be
used as a custom logo are:
custlogo.bmp
logosrv.bmp
logogrp.bmp
• width less than
or equal to 270
pixels;
• length less than
or equal to 170
pixels.
• 24-bit bmp
colour.
• width less than
or equal to 272
pixels;
• length less than
or equal to 480
pixels.
• 24-bit bmp
colour.
CopyontoaUSBpendrivethe"logogrp.
bmp" and/or "logoserv.bmp" les if you
wanttodisplayalogoforthegroupdisplay
andonefortheservicesdisplay.
Copy the le "custlogo.bmp" if the user
wants to display the same logo on all
displays.
NOTE: If in the USB pen drive there are all
leslogo,willbedisplayedtheimageofthe
le"custlogo.bmp".
Insert the USB pen drive in the
dedicated slot on the machine:
the
icon will appear on the
servicesdisplay:
Onceloadingiscomplete,removetheUSBpendrivefromthemachine.
Note: If the screensaver is active, it is possible immediately see the logos,
withoutwaitingforidletime,everytimetheuserturnsofftheanalogicallygauge.
If in the USB pen drive there is the
lelogogrp.bmp and / or logosrv.
bmp
If in the USB pen drive there is the
lecustlogo.bmp
Onallthemachinedisplays,afteraperiodofinactivity
setonthe"Screensaver"menu,the
standard Cimbali logos appear
1 2
54
3