8
1 Important Information about the Manual
1 Important Information about the Manual
1.1 Validity of these Instructions
This manual is valid for the burner control system Combustion Management System CMS in
any configuration.
The information contained in this document refer to the software versions V1.0.3. If you use
any other software version as mentioned previously some of the described functions may not
be available or not all available functions work as described in this document.
1.2 References to Other Documents
Additional information is available for the CMS from the following documents:
• Parameter list (DLT7202): Lists and explains the relevant parameters
• Fault list (DLT7201): Lists potential faults and offers help and advice for remedying faults
• Description of the Modbus TCP protocol (DLT6104)
• Manual LT3-F with UI300 (DLT3140)
1.3 Standards, Directives and Approvals
The CMS complies with the following standards and directives:
Harmonised European standards:
USA and Canada:
The CMS can be used to control burners in accordance with:
The CMS can be used for combustion systems in accordance with:
EN 298: 2012-09
EN 12067-2: 2004-02 prEN 12067-2:2017
EN 13611: 2011-12
EN 60730-1: 2012-11
EN 60730-2-5:2011-02, parts 1–7
EN 60654-3:1996-08
EN 61508: 2011-02; parts 1–7
ISO 23552-1: 2007-10
UL 372 Edition 6
UL 1998 Edition 2
UL 840 Edition 3
UL 746C Edition 6
UL 60730-2-5
EN 676: 2008-11
EN 267: 2011-11
EN 50156
To Next Page
Loading...
Need help?
General
