Launch X-431 PRO3 LINK User Manual

LAUNCH
7
2.6 WLAN Setup
The tablet has built-in Wi-Fi that can be used to get online. Once you’re online, you can register the tool,
surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates
etc.
Connect to a Wi-Fi network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Slide the Wi-Fi switch to ON, the tablet starts searching for available wireless networks.
3. Select a wireless network,
 If the chosen network is open, the tablet will connect automatically.
 If the selected network is encrypted, a network password will need to be entered.
4. When Connected appears, it indicates the Wi-Fi connection is complete.
Note: When Wi-Fi is not required, this should be disabled to conserve battery power.
Disconnect from a Wi-Fi network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Tap the network with a Connected status, then tap Disconnect.

Launch X-431 PRO3 LINK Specifications

General

Brand	Launch
Model	X-431 PRO3 LINK
Category	Diagnostic Equipment
Language	English