LAUNCH
38
8 Software Update
This module enables you to update the diagnostic software & App and frequently used software.
8.1 Update Diagnostic Software & APP
Go to Software Update on the Job Menu and tap the Downloaded tab.
The Available tab displays a list of software that can be updated. Under it, all software is categorized
into three kinds:
• Common software: mainly includes some common apps that are associated with the diagnostic
app. The software of this kind always stays at the top of the list, which can be deselected manually
(excluding the system app, such as firmware and ECU aid).
• Frequently used vehicle software: refers to the diagnostic software that is frequently used,
including the vehicle diagnostic software and Reset software. It is generally displayed following the
Common software list.
• Other vehicle software: refers to the diagnostic software that is rarely used or never used. It is
generally displayed following the Frequently used software list.
1). If the user does not download any diagnostic software during the sign-up process, all diagnostic
software is selected by default. Tap Update to start downloading.
2). If the user downloaded all/some vehicle software during the sign-up process and had it serviced for
a long period of time, only the frequently used software is selected. Tap Update to start
downloading. Other vehicle software that is rarely used will also be listed under the Available tab,
but it is not selected at default.
To download certain software that is not frequently used, check the box before the vehicle model. Tap
Update to start downloading it.
After downloading is finished, the software packages will be installed automatically.
8.2 Update Frequently Used software
If the user only intends to update the frequently used software, go to Software Update and tap the
Downloaded tab.
To Next Page
Loading...
Need help?
General
