LUBRICATION AND MAINTENANCE GRT655/655L OPERATOR MANUAL
6-20 Published 3-23-2020, Control # 654-04
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube Capacity Lube Interval Application
Turntable
40
Turntable
Gearbox
Figure 6-8 H
5.0 L
(5.3 qt)
• Check and fill every
50 hours
• Drain and fill after
first 250 hours and
every 500 hours or
12 months thereafter.
Fill gearbox to
markings on
dipstick.
41
Turntable Gear
and Drive Pinion
Figure 6-8 G Coat all teeth 500 hours or 6 months Spray on
42
Turntable
Bearing
Figure 6-8 A
Until grease
extrudes from
entire bearing
circumference
500 hours or 6 months
2 grease fittings at
front of turntable.
NOTE: Rotate turntable 90° and apply grease to fittings. Continue rotating in 90° increments and grease fittings until
entire bearing is greased.
FIGURE 6-8
9030-7
41
40
9030-8
40
42