OPERATOR MANUAL
This manual has been prepared for and is considered part of -
GRT655/GRT655L
Crane Model Number
This Manual is divided into the following sections:
SECTION 1 INTRODUCTION
SECTION 2 SAFETY INFORMATION
SECTION 3 OPERATING CONTROLS
SECTION 4 OPERATING PROCEDURES
SECTION 5 SET-UP AND INSTALLATION
SECTION 6 LUBRICATION AND MAINTENANCE
NOTICE
The crane serial number is the only method your distributor or the factory
has of providing you with correct parts and service information.
The crane serial number is identified on the builder’s decal attached to the
operator cab. Always furnish crane serial number when ordering parts
or communicating service problems with your distributor or the factory.
An untrained operator subjects himself and others to death or
serious injury. You must not operate this crane unless:
• You have been trained in the safe operation of this machine.
• You read, understand, and follow the safety and operating
recommendations contained in the manufacturer’s manuals, your
employer’s work rules, and applicable government regulations.
• You are sure the machine is operating properly and has been
inspected and maintained in accordance with the manufacturer’s
manuals
• You are sure all safety signs, guards, and other safety features are in
place and in proper condition.
Avoid Electrocution, tipping, two-blocking, and other operational
hazards
DANGER
© 2019 Grove U.S. L.L.C.
Published 3-23-2020, Control # 654-04
To Next Page
Loading...
Need help?
General
