Manitowoc VPC-MAX MLC650 User Manual

SET-UP AND INSTALLATION MLC650 VPC-MAX™ OPERATOR MANUAL
4-86
Published 04-06-18, Control # 231-14
Item Description
1Seizing
2 Dead End
3 Live End in Straight Line with Socket
4 Socket
5 Wedge
6 Rope Clip
7 Short Piece of Wire Rope
8 Terminator Wedge
9 Shipping Holes: Do not reinstall any shipping
material (bolt, plastic strap, or wire) in shipping
holes of wedge or socket after assembling.
T (Rope Clip Nut Torque)
Wire Rope Clip Size
mm
(inch)
22,23
(7/8)
25,4
(1)
28,58
(1-1/8)
31,75
(1-1/4)
Torque
kN/m
*(ft/lb
0,30
(225)
0,30
(225)
0,30
(225)
0,49
(360)
*Tightening torque values shown are based on threads being
clean, dry, and lubrication free.
ALL ARE DANGEROUS AND PROHIBITED!
Right!
Method A
Right!
Method B
Right!
Method C
TL (Tail Length)
Standard 6 to 8 Strand Wire Rope
Minimum of 6 rope diameters, but not less than 152 mm (6 in).
Rotation Resistant Wire Rope
Minimum of 20 rope diameters, but not less than 152 mm (6 in).
WRONG
Rope Backward
WRONG
Rope Backward
WRONG
Dead End Clipped
to Live End
WRONG
Wedge Backward
WRONG
Dead End Clipped
to Live End
FIGURE 4-73

Manitowoc VPC-MAX MLC650 Specifications

General

Brand	Manitowoc
Model	VPC-MAX MLC650
Category	Construction Equipment
Language	English