Manitowoc VPC-MAX MLC650 User Manual

SET-UP AND INSTALLATION MLC650 VPC-MAX™ OPERATOR MANUAL
4-4
Published 04-06-18, Control # 231-14
ASSIST CRANE REQUIREMENTS
An assist crane is required to handle parts during VPC-MAX
assembly and disassembly.
The heaviest individual weight to be handled is the fixed
mast butt, top, and equalizer package (Figure 4-44 on
page 4-49) which weighs 24 857 kg (54,800 lb).
The crane owner/user shall ensure that all rigging used to
handle loads (hooks, slings, shackles, and the like) and the
assist crane are in safe, proper working order and sized to lift
the applicable load.
PARTS BOX
Manitowoc provides a parts box (Figure 4-5).
The following types of parts are shipped in the parts boxes:
• 1 - link assembly dead end
• 10 - Shackles (various sizes, see Figure 4-6
)
• 14 - Lifting slings (various sizes, see Figure 4-6
)
• 2 - hand-held pin pullers
• 2 - hydraulic hoses
• 2 - pin puller cage weldments
• 2 - pin puller boom butt cage weldments
• 1 - quick drain valve assembly
• 1 - crawler tensioning pump
• 2 each - open end wrenches (Stucchi - 16, 20, and 24)
Thoroughly inventory the parts box according to the packing
diagrams under the parts box cover.
FIGURE 4-5

Manitowoc VPC-MAX MLC650 Specifications

General

Brand	Manitowoc
Model	VPC-MAX MLC650
Category	Construction Equipment
Language	English