Heating up the oven for the
first time and rinsing the steam
injection system
New ovens can give off an unpleasant
smell on first use. Heating up the oven
for at least 1 hour with nothing in it will
get rid of this smell. It is a good idea to
rinse the steam injection system at the
same time.
Ensure that the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
^ Remove any stickers or protective foil
from the oven and accessories.
^ Take the accessories out of the oven
and clean them (see "Cleaning and
care").
^ Before heating the oven up, wipe the
interior with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
^
Fit the FlexiClip runners to the side
runners and insert all trays and the
rack.
^
Place a container with approx. 150 ml
fresh tap water in the oven.
^
Switch the oven on.
^
Select Moisture plus d.
The lighting will come on.
Aut§ will appear in the display and the
triangle V will flash under *:
Aut§
*
;
^
Touch the OK sensor.
The recommended temperature
appears in the display and the triangle
V flashes under 6:
i60
°C
6
V
^ Use the rotary selector to set the
maximum possible temperature
(250 °C).
^
Touch OK or wait approx. 15
seconds.
The setting will then be automatically
saved.
Using for the first time
35
To Next Page
Loading...
Need help?
General
