Removing the back panel
,
Danger of injury.
Do not use the oven without the
back panel.
The back panel can be removed for
cleaning purposes.
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
^
Disconnect the appliance from the
mains.
^ Remove the side runners, together
with the catalytic side liners (if fitted).
^ Undo the four screws in the corners
of the back panel and take it out.
^ Clean the back panel (see "Cleaning
and Care / Cleaning catalytic panels
and liners").
Refit in the reverse order.
Carefully refit the back panel. Make
sure the openings are located as
illustrated in "Oven overview".
^
Reconnect the oven to the electricity
supply.
Removing the roof liner
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
^
Remove the side runners together
with the catalytic side liners (if fitted).
^ Undo the wing nut.
Do not use force to lower the top
heat/grill element as this can cause
it to break.
^
Carefully lower the top heat/grill
element and remove the roof liner for
cleaning.
You can now clean the roof of the oven.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
^
Raise the top heat/grill element and
tighten the wing nut securely.
^
Refit the side runners.
Cleaning and care
96
To Next Page
Loading...
Need help?
General
