Servicing and maintenance
46
8 Servicing and maintenance
Warning
Do not spray the machine and the surrounding area (panels, base) using a water hose,
steam-jet air ejector or high-pressure cleaner.
Ensure that the base of the machine is not flooded when cleaning the floor in order to
prevent an uncontrolled inflow of water.
Warning
Wear protective clothing and protective gloves before touching parts in contact with wash
water (filters, spray arms, ...).
When cleaning the machine Interior, wear protective gloves to avoid injury caused by sharp-
edged trays.
8.1 Daily cleaning
8.1.1 During operation
Remove the filter cylinder, clean if necessary and re-insert it.
8.1.2 Self-cleaning programme at the end of the working day
The machine is equipped with a self-cleaning programme that assists you when you are cleaning the inside
of the machine. After the first programme step, the self-cleaning programme is interrupted so that you can
remove the filter cylinder and the strainer and clean them. If you do not follow this step, the self-cleaning
programme will continue automatically after 30 seconds.
Proceed in accordance with Figures B1 to B30.
To Next Page
Loading...
Need help?
General
