PIN menu
56
12.2 Automatic switch on
Here you can:
programme, when the machine is to fill and heat up automatically.
The automatic switching on can be set either per day and/or for a special date. If the inputs overlap, a
specific date always takes precedence over the weekly programme.
Ensure that the machine door is closed, that the customer-side mains disconnector switch is switched on,
and that the water shut-off valve is opened at the moment of automatic activation.
Automatic switch-on programming
Tap the following buttons in turn:
Setting the weekday
Press the button (3).
Use the scroll buttons to select the required weekday.
Tap on the button of the selected weekday.
The background of the button becomes white.
Enter the time for the start of automatic activation using
the numeric keypad.
Repeat the above step as necessary for the other days
of the week.
Check whether the button (3) is activated (white
background). Only then is automatic switch-on active.
Press the back button (2) to save your input.
Setting a special date
Press the button (1).
Enter the time and the date for the start of automatic
activation using the numeric keypad.
Check whether the button (1) is activated (white
background). Only then is automatic switch-on active.
Press the back button (2) to save your input.
INFO The date and time of the next automatic activation are
displayed when the machine is switched on. However,
the machine can be used before this point of time.
To Next Page
Loading...
Need help?
General
