Miele PG 8164 - 19 Taking the Machine out of Service for a Long Period; 20 Putting the Machine Back into Service after a Long Period of Disuse; 21 Technical Information; 22 Emissions

Taking the machine out of service for a long period
68
19 Taking the machine out of service for a long period
Follow the notes if the machine needs to be out of operation for a long duration (holidays, seasonal
business).
 Empty the machine using the self-cleaning programme ( 8.1.2).
 Clean the machine ( 8.1.3 and 8.1.4).
 Leave the door open.
 Close the on-site water stop cock.
 Switch off the on-site mains disconnector.
If the machine is in a place that is not frost-free:
 Instruct an authorised service technician to make the machine frost-resistant.
20 Putting the machine back into service after a long period of disuse
 Open the on-site water stop cock.
 Switch on the on-site mains disconnector.
 Switch on the machine.
If the machine was in a place that was not frost-free:
After extended periods of disuse, the machine must be completely climatised (at least 24 hours at 25 °C). If
this requirement is met:
 Contact an authorised service technician to put the machine back into service.
21 Technical Information
Voltage
see data plate
Total connection value
Fuse
Minimum flow pressure
 16.1
Maximum inlet pressure
Water inlet temperature
22 Emissions
Noise
Workplace-related emission sound pressure level L
pA
: max. 57 dB(A) (depending on the selected
programme)
Measurement uncertainty: K
pA
: 4 dB
Exhaust air
Adhere to the VDI Guideline 2052 when designing the ventilation system.
23 Disposal
Contact your dealer so that the materials in the machine can be reused or disposed of in accordance with
local legislation.