Servicing and maintenance
47
Terminating the self-cleaning programme:
Press this button.
The background of the button becomes blue.
The machine is filled again.
8.1.3 Cleaning the interior
Caution
Ensure that there are no rusty foreign objects in the machine which can also cause the
"stainless steel rust-free" material to start rusting. Rust particles can come from non-rust-free
dishes, cleaners, damaged wire baskets or non-rust-protected water lines.
The following materials must not be used for cleaning:
High-pressure cleaner
Detergents containing chlorine or acid
Cleaning sponge or wire brush containing metal
Abrasives or abrasive cleaners
Remove any soiling from the interior of the machine with a brush or a cloth.
Clean the labyrinth below the door.
8.1.4 Cleaning the exterior of the machine
Clean the display with a damp cloth.
Clean the external surfaces using a stainless steel cleaner and stainless steel conditioner.
8.2 Weekly cleaning
Cleaning the spray arms (top and bottom)
Proceed in accordance with Figures C1 to C6.
8.3 Monthly cleaning
Cleaning the dirt trap
Close the on-site stop cock for the water supply.
Clean the dirt filter in the dirt trap.
8.4 Descaling
If the machine is operated with water of high hardness without water treatment, descaling is necessary at
regular intervals ( 12).
To Next Page
Loading...
Need help?
General
