Mimosa Backhaul Help Content
Mimosa Backhaul LED Status Indicators
Copyright © 2014 Mimosa Page 191
B5-Lite LED Status Indicators
Product Applicability: B5-Lite
Two LED indicators are located on the RJ-45 jack to communicate operational status: Ethernet (Yellow) and
Power/Wireless (Green).
The tables below describe the meaning of each LED's state: Off, On (solid), On (blinking), and Color.
Power / Rx Signal Status LED Table
The Power / Rx Signal Status LED indicates the presence of power, and communicates Rx signal strength.
State LED Description
Off No Power to Device / Error
1
Solid Green Power On
Blinking Green Associated; Blink rate proportional to signal strength
2
1
Please check wiring, cycle power, and then contact Mimosa Support if necessary.
2
Ranges from 1 Hz (one blink per second at -90 dBm or less) to 10 Hz (one blink per 100 ms at -50 dBm or greater).
Ethernet Status LED Table
The Ethernet Status LED indicates activity for the wired network connection. The device is designed to perform best
with a 1000BASE-T connection. While other port speeds are possible, they are not recommended because they
create a data bottleneck that reduces end-to-end throughput.
State LED Description
Off No Ethernet Connection / No Activity
Blinking Yellow Ethernet Activity
To Next Page
Loading...
Need help?
General
