1-8 Overview
b) Select the application region.
3. Click [OK] to assign the general result to the new item.
NOTE: Re-assignment for the assigned general result is not available.
Exiting Result Assignment
Select [Cancel] in the matching list to exit.
Auto Spectrum Calculation Assignment
Like a general measurement result, you can assignment the auto spectrum calculation results to
an application item, with the same steps described above.
For details about auto spectrum calculation, please refer to “3.4.5 D Trace”.
NOTE: The application item to assign should be an item using D trace in current application
package.
1.6 Cross-window Measurement
For linear probe, cross-window measurement is available in dual-B mode when the left and right
windows are imaging with the same probe, depth and invert mode.
1.7 Report
The report records measurement results, which are automatically saved by the system after each
measurement.
Press <Report> to enter the report dialog box.
Default report of the current exam appears.
After viewing, press <Report>, <Freeze> or <Esc>, or select [Cancel] or [OK] to exit the report
page.
To Next Page
Loading...
Need help?
General
