Mindray Z50BW User Manual

Setup 11-3
Type
Item
Description
Patient Info
Info displays in
image banner
To select if to display the following patient information
on the image banner: Gender, Age, Operator, ID,
Name, Hospital
H&W Unit
To set the unit for patient height and weight.
Surface Formula
To set the surface formula.
Other
Image Output Size
To set the size for a stored image:
Image Area
Standard Area
Full Screen
Clip length/ Time
(s)
Times: 1~60s
Output Mode
PAL/ NTSC
Patient
Management
Sending/printing
after End Exam
Select if to automatically archive the exam data to
DICOM server for storage/print.
Screen
Saver
Enable
ScreenSaver
To enable screen saver function, and select the waiting
time until screen saver.
Enable Standby
Available after “Enable ScreenSaver” is selected.
Select Picture
After screen saver function is enabled, click [Browse] to
select the figure used for screen saver, and click
[Preview] to see the effect.
Exam Setup
Status after exam
ends
Select to enter the imaging scanning, patient info or the
Worklist after ending an exam.
Display
Color temperature
Cold/ Warm
Brightness/Contrast
Load Factory
Load the factory data of the display brightness and
contrast.
11.1.3 Image Preset
Open the Image Preset page via [Setup]-> [System Preset]-> [Image], as shown in the figure
below.

Mindray Z50BW Specifications

General

Brand	Mindray
Model	Z50BW
Category	Medical Equipment
Language	English