Setup 11-7
[>]: add a selected exam mode in the [Exam Library] to the [Exam Selected] list.
[>>]: add all exam modes in the library to the [Exam Selected] list.
[<]: remove an exam mode selected from the [Exam Selected] list.
Click [Up] and [Down] to adjust the sequence of the items in Selected Items.
Click [Default] to set a selected exam mode as the default exam mode.
3. Click [Save] to confirm the modified setup; or click [Cancel] to cancel the modified setting.
11.3 Measure Preset
For measurements details, please refer to the Advanced Volume.
11.4 Comment Preset
You can preset the custom comments library for each exam mode to your preference. The
comments in the library are provided by the system or user-defined ones. The name of the
library, which can be set, will appear on the first page of the library.
Open the Comment page via [Setup]-> [Comment Preset].
Procedures:
1. Select an exam mode.
2. Enter Library Name: you can enter characters for the library name, or accept the default
name (the same as that for the exam mode).
3. Select an available item.
4. Add user-defined comments: directly enter comment texts, or select comment texts for
the comment library.
Directly enter comment texts: position the cursor in the field box above [Add
Comment], enter the text comment through the keyboard, and then click [Add
Comment]. Then the directly-entered comment will be added to the Available Items
and Selected Items.
To Next Page
Loading...
Need help?
General
