Minelab GPZ7000 User Manual

User Button
Use this page to assign the function of the User button.
The User Button
The User button provides easy access to your favourite
function. There is a wide choice of functions that can be
assigned to the User button. The assigned function will be
activated each time the User button is pressed.
The available User button functions are:
• Backlight (default)
• Threshold Level
• Ground Balance Mode
• Noise Cancel - Manual
• Sensitivity
• More
The User Button Page
Backlight
Backlight is the default function
assigned to the User button; press to
turn the backlight on and off.
Threshold Level
Press the User button to display the
Threshold Level adjustment range
screen. The Threshold can then be
increased or decreased using the left
and right Arrow buttons. (page 25)
Ground Balance Mode
Press the User button to display the
Ground Balance Mode selection box.
Choose from either Auto or Manual.
(page 26)
Noise Cancel ‑ Manual
Press the User button to display the
Manual Noise Cancel adjustment
screen. The Noise Cancel channel can
then be adjusted using the left and
right Arrow buttons. (page 23)
Sensitivity
Press the User button to display the
Sensitivity adjustment screen. The
Sensitivity can then be adjusted using
the left and right Arrow buttons.
(page 23)
More
Select More to display a list of
additional functions to assign to the
User button.
A selection list will appear with the following options:
• Gold Mode
• Ground Type
• Noise Cancel - Auto
• Volume
• Volume Limit
• Threshold Pitch
• Audio Smoothing
• GPS
• Backlight Brightness
• Wireless
• Connect WM 12
• Connect Additional
WM 12
• FindPoints
• WayPoints
• GeoHunts
• Map Zoom
• Re-centre
• Clear GeoTrail
• View GeoTrail
• View Names
User Button
31

Minelab GPZ7000 Specifications

General

Brand	Minelab
Model	GPZ7000
Category	Metal Detector
Language	English