Mitsubishi MELSEC Q Series Programming Manual

7-61
TEST(P),DTEST(P)
1
2
3
4
6
6
7
8
7.4 Bit processing instructions 7.4.2 Bit tests (TEST(P),DTEST(P))
7.4.2 Bit tests (TEST(P),DTEST(P))
TEST(P),DTEST(P)
Function
TEST
(1) Fetches bit data at the location designated by within the word device designated by ,
and writes it to the bit device designated by .
(2) The bit device designated by is OFF when the relevant bit is "0" and ON when it is "1".
(3) The position designated by indicates the position of an individual bit in a 1-word data
block (0 to 15). When 16 or more is designated at , the target is the bit data at the position
indicated by the remainder of n / 16. For example, when n 18, the target is the data at b2
since the remainder of 18 / 16 1 is "2".
DTEST
(1) Fetches bit data at the location designated by within the 2-word device designated by ,
or +1, and writes it to the bit device designated by .
(2) The bit device designated by is OFF when the relevant bit is "0" and ON when it is "1".
: Number of the device where bit data to be extracted is stored (BIN 16 bits)
: Location of the bit data to be extracted (0 to 15 (TEST)/0 to 31 (DTEST)) (BIN 16/32 bits)
: Number of the bit device where the extracted data will be stored (bits)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
K, H
Other
Bit Word Bit Word
–– ––
––
–– –– ––
Basic
Process
High
performance
Redundant Universal LCPU
Command
Command
P
TEST, DTEST
TESTP, DTESTP
S1
S2
S1
S2
D
D
indicates an instruction symbol of TEST/DTEST.
S1
S2
D
S1
S2
D
S2
S1
D
D
S2
S2
bit
b15 b0
b5
S1
D
S2
S2
(When =5)
S2
S1
S1
D
D

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English