Mitsubishi MELSEC Q Series Programming Manual

7-216
ESTR(P)
7.11.11 Conversion from floating decimal point to character string
data (ESTR(P))
ESTR(P)
*1:Available only in multiple Universal model QCPU and LCPU
Function
(1) Converts the 32-bit floating decimal point data designated by to a character string
according to the display designation specified by , and stores the result into the area
starting from the device number designated by .
(2) The post-conversion data differs depending on the display designation designated by .
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
: 32-bit floating decimal point data to be converted or head number of the devices where the data is stored
(real number)
: Head number of the devices where display designation for the numerical value to be converted is stored (BIN 16 bits)
: Head number of the devices where the converted character string will be stored (character string)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*1
––
–– –– –– –– –– ––
–– –– –– –– –– ––
Process
High
performance
Redundant Universal
Ver.
Basic
LCPU
Command
Command
ESTRP
ESTRP
ESTR
ESTR
D
D
S2
S2
S
S1
S1
S2
D
S1
S2
D
S1
S2
D
S2
1: Exponent format
Total number of digits
+1
0: Decimal point format
Number of digits in decimal fraction
+2
Setting is possible in the range from 2 to 24.
S2
S2
S2
The converted data differs depending
on the format selected at .
S2

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English