Mitsubishi MELSEC Q Series Programming Manual

7-278
DEG(P)
7.12.15 Conversion from floating-point radian to angle
(Single precision) (DEG(P))
DEG(P)
*1: Applicable for the Universal model QCPU, LCPU.
Function
(1) Converts units of angle size from radian units designated by to angles, and stores result
at device number designated by .
(2) The conversion from radians to angles is performed according to the following equation:
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
: Radian angle to be converted to degrees or head number of the devices where the radian angle is stored
(real number)
: Head number of the devices where the value converted in degrees will be stored (real number)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*1
––
–– ––
*1
–– ––
Process
High
performance
Redundant Universal
Ver.
Basic
LCPU
Command
Command
DEGP
DEG
DEGP
DEGSD
S D
S
D
S
D
S
D
+1 +1
S DS D
32-bit floating-point
real number
(
32-bit floating-point
real number
( )rad
Degree unit = Radian unit x
180

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English