Pairing the Authentication PIN by Manually
Keying in the Same PIN
Follow the procedure in Searching and Pairing the
Bluetooth Device on page 132 to search for available
Bluetooth devices. Start pairing with the
Authentication PIN by following the steps described
next.
1 or to the required device. Press the Menu
Select button directly below Sel to initiate pairing.
Your radio only supports HSP, DUN, PAN and
SPP Bluetooth profiles.
If successful, the display shows Pairing in
progress... followed by a request for PIN
number. A blinking cursor appears below the
Enter PIN:.
If unsuccessful, the display shows BT profiles
not supported. The display returns to Available
Dev screen.
2
Use the keypad to enter the PIN. Press
to move
one space to the left. Press
to move one space
to the right. Press the Menu Select button directly
below Del to delete.
3
Press Ok to continue pairing the radio and the
device. Enter the same PIN number on the device.
The pairing process can be canceled by pressing
the Menu Select button below Cncl.
If successful, the display shows Pairing in
progress,<Device Friendly Name> paired,
Connecting in progress... followed by
<Device Friendly Name>connected. The
display returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will
occur:
•
The display shows <Device Friendly Name>
PIN auth fail (if the PIN numbers are
different).
•
<Device Friendly Name> connect failed
(if the connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio (Routing the Audio
from the Radio to the Headset)
The following methods are options on how to turn on
the Bluetooth audio. The result of all the methods is
the same. You can use the options interchangeably
To Next Page
Loading...
Need help?
General
