Note
The radio only exits the Emergency state
using one of the ways mentioned in the
previous sections.
See Sending an Emergency Alarm on page
84, Sending an Emergency Call (Trunking
Only) on page 84, Sending an Emergency
Alarm with Emergency Call on page 85, or
Sending a Silent Emergency Alarm on page
86.
Man Down
Man Down condition is determined based upon the
radio tilt angle or a combination of radio tilt angle and
the lack of radio motion.
Man Down feature is an alternate way to activate the
Emergency feature if Emergency has been
programmed in your radio.
Note
This feature could be preprogrammed for all
channels that support Emergency feature or
could be preprogrammed specifically to a zone
and channel which has Emergency feature.
Consult your agent or qualified technician for
more details.
Your radio automatically activates Emergency Alarm
or Call when the radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and
radio motion below the motion sensitivity level,
depending upon how the radio is programmed. The
radio must stay in this condition for a preprogrammed
amount of time before the Emergency Alarm or Call is
activated.
Note
It is recommended that an Emergency button
is preprogrammed in order to allow the user to
exit the emergency condition.
The Man Down feature provides a Clear function to
the user. After a Man Down condition has been
detected, the user can press a preprogrammed Clear
button or preprogrammed Menu Select button to
cancel the Man Down condition. The radio remains in
the Man Down state without triggering an emergency
condition until the radio is moved out of the Man
Down state, at which point Man Down functionality
resumes.
The Man Down feature has three phases:
To Next Page
Loading...
Need help?
General
