Motorola APX4000 XH User Manual

If the target radio does not respond before the
time out, the display shows No answer.
6 Press and hold the PTT button to talk. Release the
PTT button to listen.
7
Press
to return to the Home screen.
Making a Telephone Call (Trunking Only)
This feature allows you to make calls similar to
standard phone calls to a mobile or landline phone.
1 Perform one of the following actions:
• To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Phone Call button to
dial the preprogrammed phone number.
Proceed to step 5.
• To access this feature via the menu, proceed
to the next step.
2
or to Phon, and press the Menu Select button
directly below Phon.
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the
following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• or to the required phone number.
• Use the keypad to enter the required phone
number.
4 Press the PTT button to dial the phone number.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 When your call is answered, press and hold the
PTT button to talk. Release the PTT button to
listen.
7
Press to return to the Home screen.
See Phone Call Displays and Alerts on page 51 for
more information if your call is NOT answered.
General Radio Operation
61
English

Motorola APX4000 XH Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Yes
Bluetooth	Yes
Frequency Range	764-870 MHz
Dimensions	40 D mm
Encryption	AES, DES, ADP