Motorola APX4000 XH User Manual

If there is no voice activity for a preprogrammed
period of time, the call ends.
If the call reaches the maximum ring time, the call
ends.
Adding a New Contact Entry
1
or to Cnts and press the Menu Select button
directly below Cnts.
The entries are alphabetically sorted.
2
or to [New Contact] and press the
Menu Select button directly below Sel.
3
or to Name and press the Menu Select
button directly below Edit.
The display shows Edit name and a blinking
cursor appears.
4 Use the keypad to enter the name and press the
Menu Select button directly below Ok once you
have entered the name.
To cancel this operation, press the Menu Select
button directly below Cncl to return to the previous
screen.
5
or to [Add Number] and press the Menu
Select button directly below Sel.
6
or to Number 1 and press the Menu
Select button directly below Edit.
The display shows Edit Number 1 and a blinking
cursor appears.
7 Use the keypad to enter the number and press
the Menu Select button directly below Ok once
you have entered the number.
To cancel this operation, press the Menu Select
button directly below Cncl to return to the previous
screen.
8 Perform one of the following actions per the
information you need to add to current name:
•
or to Type 1 and press the Menu
Select button directly below Edit.
or to the required mode and press the
Menu Select button directly below Ok.
• Repeat Steps 6 through 7 to enter or edit the
exisitng system IDs.
• Repeat Steps 5 through 7 to add a new
number.
Advanced Features
72
English

Motorola APX4000 XH Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Yes
Bluetooth	Yes
Frequency Range	764-870 MHz
Dimensions	40 D mm
Encryption	AES, DES, ADP