a) Use the preprogrammed Transmit Power
Level switch to toggle the power level between
low and high power.
• Selecting the Power Level via the radio menu:
a)
or to Pwr.
b) Press the Menu Select button directly below
Pwr.
The display shows Low power and the low power
icon or the display shows High power and the high
power icon.
Selecting a Radio Profile
This feature allows you to manually switch the visual
and audio settings of the radio. The display, backlight,
alert tones, and audio settings are defined according
to the preprogrammed radio settings of each radio
profile.
Please refer to a qualified technician for more
information.
Note
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You will
hear the Menu Inactive Exit Tone upon feature
exit.
The following methods are options on how to select a
radio profile. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
• Selecting a radio profile via the preprogrammed
Profile button:
a) Press the preprogrammed Profile button.
b) or to scroll through the menu
selections.
c) Press the Menu Select button directly below
Sel to select the required radio profile, or press
the Menu Select button directly below Exit to
exit the screen without making any changes.
The radio returns to the Home screen. The profile
name on the Home screen indicates the current
selected radio profile.
• Selecting a radio profile via the radio menu:
a)
or to Prfl and press the Menu Select
button directly below Prfl to access the
Profiles feature screen.
To Next Page
Loading...
Need help?
General
