30
If configured by your Service Provider, your MTP850 will
display an internal Home display until another message is
received.
Time & Date
If your Service Provider configured this feature, the MTP850
shows current time and date on home display.
You can also check time and date, wherever in menu, by
pressing relevant one-touch button.
Check in the menu options whether the Service Provider has
given you the capability of customising time and date settings
(see page 134).
Terminal Disable/Enable
Your MTP850 is provided with a feature that allows your
Service Provider to disable it temporarily in case it is stolen.
When your MTP850 is disabled, no calls can be initiated or
received.
While your MTP850 is disabled, it will look and act like it is
turned Off.
If you try to turn your MTP850 On when it is disabled, it will
operate as described above.
If your MTP850 is found, your Service Provider can re-enable
it. After your MTP850 is re-enabled, you may resume normal
operation.
Terminal Permanent Disable
Your MTP850 is provided with a feature that allows your
Service Provider to disable it permanently in case it is stolen
or lost. When your MTP850 is disabled permanently, it
becomes inoperable.
After a Permanent Disable the MTP850 can not be re-
enabled by your Service Provider over the air.
To Next Page
Loading...
Need help?
General
