NEC iPasolink 200 User Manual

5-18 ODU MOUNTING
NWD-107460-02E Installation
5.1.2 With Hybrid/Coupler
This section explains the antenna direct mounting type ODU installation with
Hybrid/Coupler.
Mounting
Note The details are referred to the installation manual which is attached to
the antenna.
ANDREW VHLP type Bracket
Mounting hole for
Hybrid/Coupler
Hole for guide pin
Note The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
O-ring
Hole for guide pin
O-ring
RFS SB1 type Bracket
RFS C-Mount type Bracket
Mounting hole for
Hybrid/Coupler
O-ring
Hole for guide pin
Mounting hole for
Hybrid/Coupler
Note The tightening torque is 4.0 N·m ±10%.
Be careful not to damage the O-ring (Antenna).
Submission Prohibited
NEC Internal Use Only

NEC iPasolink 200 Specifications

General

Brand	NEC
Model	iPasolink 200
Category	Network Hardware
Language	English