NEC SL100 User Manual

Program 13 : Abbreviated Dialing
13-04 : Speed Dialing Number and Name
Level
SB
Description
Use Program 13-04 : Speed Dialing Number and Name to store Speed Dialing data in the Speed
Dialing areas. This program is also used to define the names assigned to the Speed Dialing numbers.
Input Data
Speed Dialing Bin Number 000 ~ 999
Item
No.
Item Input Data Default
Related
Program
Note
01 Speed Dialing Data
Assign dial number for 000-
999 bins
1~9,0,
*
,#,Pause (Press line
key 1), Recall/Flash (Press line
key 2),
@ = Code to wait for answer su-
pervision in ISDN (Press line key
3)
(Maximum 36 digits)
No setting
02 Name Maximum 12 Characters (Use dial
pad to enter name)
No setting
03 Transfer Mode 0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
3 = Remote Monitor
0
04 Transfer Destination Num-
ber
If Transfer mode is (Refer to 13-
04-03) :
1 = Internal Dial Mode
1~9,0,
*
,#,P,R,@
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 4 digits)
No setting 13-04-03
05 Incoming Ring Pattern Incoming Ring Pattern
0 = Normal Pattern
1~4=TonePattern(1~4)
5~9=ScalePattern(1~5)
0 13-04-03
06 CR/PR feature 0=Disable
1 = Enable
0 14-05
07 VRS Message Number 0 ~ 100 0
08 Memo1
Can only be
changed in WebPro
or PCPro.
Maximum 28 digit No setting 15-02-58
09 Memo2
Can only be
changed in WebPro
or PCPro.
Maximum 28 digit No setting 15-02-58
ISSUE 1.1SL1000
Program
13
Program 13 : Abbreviated Dialing2-90

NEC SL100 Specifications

General

Brand	NEC
Model	SL100
Category	Telephone
Language	English