Program 92 : Copy Program
92-04 : Extension Data Swap
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-04 : Extension Data Swap to swap data between two extensions.
Input Data
Item No. Item Input Data
01
1st Extension Number
Up to four digits.
2nd Extension Number
The following table lists Programs that use the Extension Data Swap function.
Program Number Program Name Note
11-02 Extension Numbering
12-05 Night Mode Group Assignment for Extensions
13-03 Abbreviated Dial Group Assignment for Extensions
13-06 Station Abbreviated Dial Number and Name
15-01 Extension Basic Data Setup
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Extension
15-13 Loop Key Data
15-17 CO-Message Waiting Indication
15-18 Virtual Extension Key Enhance Options
16-02 Department Group Assignment for Extensions
20-06 Class of Service for Extension
20-29 Timer Class for Extensions
21-02 Trunk Group Routing for Extension
21-04 Toll Restriction Class for Extension
21-07 Toll Restriction Override Password Setup
21-10 Dial Block Restriction Class per Extensions
21-11 Hotline Assignment
ISSUE 1.1 SL1000
Program
92
Programming Manual 2-569
To Next Page
Need help?
General
