Program 90 : Maintenance Program
90-68 : Side Tone Auto Setup
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-68 : Side Tone Auto Setup to setup the volume level of Side Tone for each Analog
Trunk Port.
This program will change the setting of "PRG 81-07 CODEC Filter Setup for analog Trunk Port" If the
Analog Port is in used or if it is other than a Analog Trunk Port then it will give out the error message.
Input Data
Item No. Item Input Data Default Related Program
01 Adjustment Start
This will start the
Adjustment of Side
Tone for each Ana-
log Trunk Port. If it is
successful it will
change the PRG
81-07-0. If it is suc-
cessful it will ask to
change it for all Ana-
log Trunk Port.. If
you select to change
the Setting All Ana-
log Trunk Port it will
change all the Port
in 81-07.
Trunk Port Number
001 ~ 126
No setting 81-07-01
21-01-05
21-01-06
14-01-07
21-06-06
21-05-07
02 1 digit data
This setting will ask
to use the digit after
Line is retrieved.
Dial (1 dight) 0 -
Conditions
None
Feature Cross Reference
None
ISSUE 1.1 SL1000
Program
90
Programming Manual 2-563
To Next Page
Need help?
General
