Program 10 : System Configuration Setup
10-63 : DHCP Client Setting
Level
IN
(This Program is available for V1.5)
Description
Use 10-63 : DHCP Client Setting to set the data of DHCP Client.
Input Data
Item No. Item Input Data Default
01 DHCP Client Mode
If you are using IP phones/trunks it is recom-
mended to not use the DHCP client function, a
static IP address would be preferred. If you are
going to still use the DHCP client function then the
DHCP server should be setup so that the same IP
address is always provided to the system.
When changing this program a system
reset is required.
0 = Disabled
1 = Enabled
0
Conditions
None
Feature Cross Reference
None
ISSUE 1.1SL1000
Program
10
Program 10 : System Configuration Setup2-52
To Next Page
Loading...
Need help?
General
