NEC SL100 User Manual

Program 84 : Hardware Setup for VoIPDB
84-27 : VoIP Basic Setup
Level
IN
Description
Use Program 84-27 : VoIP Basic Setup to set the DTMF Relay and the SRTP mode of the VoIPDB.
Input Data
Slot Number 0
Item No. Item Input Data Default
01 DTMF Relay Setup 0 = DTMF Relay disabled
1 = In-Band DTMF Relay - Do not report to
host processor
2 = Out Band Relay - Do not pass tones as
voice
2
02 Setup CODEC Mode
Default means the system uses another
CODEC except G.723.
Mode 1 means the system uses all CO-
DECs, but the limitation of the total number
of available DSP will be applied.
0 = Default
1 = Mode 1 (G.723/iLBC)
0
03 SRTP Mode Setup 0=Disable
1 = Enable
0
04 SRTP Mode Select 0=Mode1 0
06 H.245 Port Number 0 ~ 65535 10100
07 Preparation Completion Response Port
Number
0 ~ 65535 4000
08 DTMF Duration 0 = Use RFC2833
25 ~ 2000 ms
0
09 DTMF Pause 0 = Use RFC2833
25 ~ 2000 ms
0
10 DTMF Twist Positive Level 0~24dB 5
11 DTMF Twist Negative Level 0~24dB 0
12 DTMF Duration 30 ~ 2000 ms 100
13 DTMF Level 1~61(-36dB~+24dB
1=-36dB
2=-35dB
:
37=0dB
:
60=23dB
61=24dB
25 (- 12 dB)
14 ICMP REDIRECT 0 = Enabled, Voice packets will follow ICMP
redirect messages.
1 = Disabled, Voice packets will NOT follow
the ICMP redirect message.
1
Conditions
None
ISSUE 1.1 SL1000
Program
84
Programming Manual 2-481

NEC SL100 Specifications

General

Brand	NEC
Model	SL100
Category	Telephone
Language	English