NEC SL100 User Manual

Program 14 : Trunk, Basic Setup
14-07 : Trunk Access Map Setup
Level
IN
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an exten-
sion access options for trunks. For example, an extension can place only outgoing calls on trunks to
which it has outgoing access. There are 126 Access Maps with all 126 trunk ports programmed in Map
1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk
Access Maps to extensions. Each trunk can have one of eight access options for each Access Map.
Emergency calls will override Program 14-07 settings.
Input Data
Access Map Number 001 ~ 126
Item No.
Trunk Port
Number
Input Data
01 001 ~ 126 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk on Hold
Default
Access map No. Trunk Port No. Default
1
1 7(T,R,H)
2 7(T,R,H)
::
126 7 (T, R, H)
2
1 0 (No access)
2 0 (No access)
::
126 0 (No access)
:
1 0 (No access)
2 0 (No access)
::
126 0 (No access)
126
1 0 (No access)
2 0 (No access)
::
126 0 (No access)
ISSUE 1.1SL1000
Program
14
Program 14 : Trunk, Basic Setup2-106

NEC SL100 Specifications

General

Brand	NEC
Model	SL100
Category	Telephone
Language	English