NEC SL100 User Manual

Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item No. Item Terminals Default
Related
Program
Note
01 Bypass Call
Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice mail
Single Digit dialing code in Program
11-16-09.
MLT, SLT 807
02 Conference MLT, SLT 826
03 Override (Off-Hook Signaling) MLT, SLT 809
04 Set Camp-On MLT, SLT 850
05 Cancel Camp-On MLT, SLT 870
06 Switching of Voice Call and Signal
Call
MLT, SLT 812
07 Step Call MLT, SLT 808
08 Barge-In MLT, SLT 810
09 Change to STG (Department
Group) All Ring
MLT, SLT 780 16-02
10 Station Speed Dialing MLT, SLT #2
11 Group Speed Dialing MLT, SLT #4
12 Last Number Dial MLT, SLT #5
13 Saved Number Dial MLT, SLT 815
14 Trunk Group Access MLT, SLT 804
15 Specified Trunk Access MLT, SLT #9
17 Clear Last Number Dialing Data MLT, SLT 876
18 Clear Saved Number Dialing Data MLT, SLT 885
19 Internal Group Paging MLT, SLT 801 31-01-01
20 External Paging MLT, SLT 803
21 Meet-Me Answer to Specified Inter-
nal Paging Group
MLT, SLT 864 31-02-01
ISSUE 1.1 SL1000
Program
11
Programming Manual 2-69

NEC SL100 Specifications

General

Brand	NEC
Model	SL100
Category	Telephone
Language	English