NEC SL100 User Manual

Item No. Item Input Data Default
12 DID Table Name Output
Determine if the DID table name should be dis-
played.
0 = Not Displayed
1 = Displayed
0
13 CLI Output When DID to Trunk
Determine if the CLI output should be displayed
for DID.
0 = Not Displayed
1 = Displayed
0
14 Date
Determine whether or not the date should be dis-
played on SMDR reports.
This option must be set to 0 if the
trunk name is set to be displayed in
Program 35-02-03.
0 = Not Displayed
1 = Displayed
0
15 CLI/DID Number Switching
Determine whether or not the CLI/DID Number
Switching should be displayed.
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
0
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming
calls on ANI/DNIS or DID trunks. If set to (1),
ANI/DNIS trunks can print DNIS digits. If set to
(0) trunk names are printed instead.
0 = Trunk Port Name
1 = Received Dialed Number
2 = Both
0
17 Print Account Code or Caller Name of Incom-
ing Call
Determine if SMDR should print Account Code or
Caller Name of Incoming Call.
0 = ACC
1 = CNAME
0
18 Print Mode for Caller Name of Incoming Call
Determine how SMDR should print Caller Name
of Incoming Call.
0 = Normal
1=LineFeed
0
19 Dialed Number Output Format
Determine if the dialed number should display
from the first digits or from the last digits. This
option is only available for outgoing calls.
0 = Display from the first digit
1 = Display from the last digit
0
20 External Information CFW Mode
Determine which information is displayed in the
"STATION" area for a transferred call when the
extension has Call Forward set with an Abbrevi-
ated Dial number as the destination. Selecting
"0" (Transfer Info) will display the extension num-
ber which called the extension with external Call
Forward set. Selecting "1" (Incoming Info) will
display the extension number which has the ex-
ternal Call Forward set.
This option only applies when Call Forward is set
using a service code (Programs 11-11-01 ~ 11-
11-07) and the destination uses an Abbreviated
Dial bin. It does not include Off-Premise or Cen-
trex transfers.
0 = Transfer Information
1 = Incoming Information
0
21 S-Point Terminal Number 0 = MSN Number
1 = Extension Number
0
22 Security Auto Dialing
Emergency call from Watch Mode. Define SMDR
output on/off. Output is SAD (Security auto dial-
ing).
0 = Not Output
1 = Output
1
23 Watch Auto Dialing
Emergency call from Remote Inspection. Define
SMDR output on/off. Output is WAD (Watch auto
dialing )
0 = Not Output
1 = Output
1
Conditions
None
ISSUE 1.1SL1000
Program
35
Program 35 : SMDR Account Code Setup2-334

NEC SL100 Specifications

General

Brand	NEC
Model	SL100
Category	Telephone
Language	English